100% Original Alcohol Bottle - 1000ml750ml700ml375ml Glass Liquor Bottle Wholesale – Navigator Glass

We can design&manufacturing any types of glass alcohol bottles by your detailed requirement. Ranging liquor bottle sizes from mini alcohol bottles 50ml to 1.5L, and a choice between the cap, swrew top, and corks, means you can customize a unique glass liquor bottle for your brand.

Want to wholesale liquor bottles for sale? Purchasing directly from a reliable liquor bottle manufacturer, will help you find high-quality cool liquor bottles for sale, and help you save cost.

This series 375ml clear glass bottle wholesale is mainly used in beverage&liquor packaging. The product adopts high flint glass material which makes our glass bottle more clear, transparent, and environmentally friendly.

1. Bottle body skew (skew). The droplet temperature is too high or uneven. The drops are too heavy. Bad shape or improper blanking. Too short positive blow time or insufficient pressure. The mold is too hot or not enough backblown, making the mold too soft. The initial mold and forming mold are bad in shape. The bottle stays on the bottle clamp too short or the air plate is not cool enough. Too thick at the base or bottom of the bottle or uneven thickness of the bottle. The conveyor belt is uneven.

2. Blow yourself up. There are deep wall cracks in the bottle body. The molding die is too long in use. Too much forward blowing pressure or forward blowing molding die prematurely opened.Improper droplet temperature. Improper cooling air adjustment, resulting in overcooling or overheating of the primary mold. Fry seam line. There are cracks in the seam of the bottle. Droplet temperature too high or too low. The droplet shape is poor. Positive air blowing pressure is too high or time is too long. Forming die too hot. Defect in forming die joint and improper vent hole. The contact time between the glass and the initial mold is too long, the initial heat is insufficient, and the surface is hard. The forming die does not fit well with the bottom. The forming die does not open smoothly. Bottle phone line. There are transverse glass lines inside the bottle. The droplet temperature is too high. Insufficient backblowing or short contact time between glass and initial mold. Mold temperature is too high. Positive blowing starts too late, short blowing time and low pressure. Molding mold eye, air line is insufficient or blocked. Too much oil on forming die or die bottom.